Bohler S790 Microclean for Hobs
2022-08-19 13:50:02
jiangxingTools
2247
Bohler S790 Microclean for Hobs
Material composition of S790: C-1.29, Si-0.6, Mn-0.30, Cr-4.20, Mo-5, V-3, W-6.30
Standard: 1.3345, HS6-5-3C, EN ISO 4957
Performance feature of Gear Hobs with S790:
Toughness & Ductility: high
Wear Resistance: good
Compressive strength: good
Edge Stability: good
Grindability: high
Hot Hardness (red hardness): good
相關(guān)文章
-
PA20° Standard Involute Gear Milling Cutter with Module m3.75
PA20° Standard Involute Gear Milling Cutter with Module m3.75Module: m3.75, pressre angle: 20°Dimens... - HSS M42 Material for Gear Shaper Cutter and Gear Hob
- PA30° DIN5480 Involute Spline Gear Hob with Module m3.5
- PA20° PCD 200mm Disc Type Gear Shaper Cutter with Module m8~m12
- HSS M2, M35 Gear Hobbing Cutters with Protuberance
- HSS Fine Pitch Gear Hob Cutter with DIN 58412 Standard
- PA30° DIN5480 Involute Spline Gear Hob with Module m8
